Concrete mixer maintenance rules

Concrete mixer maintenance rules

 Today Xiao Bian and everyone to share the concrete mixer maintenance

 1. When the new car is used for 1-2 weeks, the connection bolts of the auxiliary beam and the owner's girder should be tightened, the fixing bolts of the support bracket should be checked, the flange of the oil pump flange and the connecting bolts of the drive shaft should be loosened, and they should be fastened once every half month.
 2. The hydraulic oil and reducer oil should be replaced once the new car is used for about 100 days.
 3, butter should be used once a week to ensure normal lubrication. In addition, the supporting roller and raceway joints should be greased once every 3-4 days to ensure normal operation.
 4. Clean the inside and outside of the mixing drum every time when the work is done to ensure that there is no cement and accumulation in the mixing drum. If it takes more than 2-3 hours to unload at the site, it must be washed in the mixer.
 5. Check the position of the oil level on the hydraulic tank before each trip to check the oil level. When the oil level is not clear, check the hole to indicate normal.
 6. After the operation handle is changed from stirring to unloading or from unloading to stirring, it should be stopped at the middle position for 3-5 seconds, and the next action will be performed after the mixer stops rotating. When the handle is pulled down to the extreme position, it cannot continue to use force to prevent the oil pump from jamming.

 

2018-06-04 11:24:52